Bernina artista 200 Owner's Workbook page 44

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold the fabric in half to 3" x 6".
• Mark two lines perpendicular to the fold, spacing them about 2" apart.
• Position the foot over the first line, aligning the fold of the fabric with the
• Select the Keyhole Buttonhole #57.
• Open the button measuring screen by touching the Length/On-Screen Measurement symbol on the
function bar; a scale appears on the screen.
• Hold a button against the scale on the screen.
• Use one of the external knobs to adjust the colored circle to the size of the button. The buttonhole
size is shown in millimeters (mm). Touch OK.
• Sew the buttonhole on the first line.
• Use the Automatic Thread Cutter to cut the thread.
• Sew the programmed buttonhole on the second line; use the Automatic Thread Cutter to cut the thread.
• Trim and mount sample.
BERNINA
M Y
ASTERING OUR
BUTTONHOLE LENGTH
ON-SCREEN MEASURING
Fabric: Heavy flannel, 6" x 6"
Two 10" lengths of gimp cord
Stabilizer: 1 piece, 3" x 6"
Needle: 90/14 Embroidery
Thread: 30 weight cotton embroidery
Presser Foot: Automatic Buttonhole Foot with Slide #3A
®
8/15/02
BERNINA
5 / " marking behind the foot.
8
S C
ECTION
®
artista 200
artista 200/44