Bernina artista 200 Owner's Workbook page 79

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Feet:
Make 2 tears in the fabric, about 1" each. Make one hole about ½" round.
•
Select Automatic Mending Stitch #22 for the first tear.
•
• Attach Reverse Pattern Foot #1C.
• Engage the Stitch Counter symbol.
• Sew the first row, the length of the tear - press the Quick Reverse button (the length
has now been programmed).
• Complete the darning program - the machine stops automatically.
Select Reinforced Mending Stitch #23 for the second tear.
•
• Use Automatic Buttonhole Foot with Slide #3A this time.
• Insert the needle in the area to the left of the top of the tear.
• Begin sewing; notice that the running stitch is sewn first.
• When the length of the tear has been covered, press the Quick Reverse button.
• Programming is complete and the machine will finish automatically.
Manual Darning of the hole with Foot #9.
•
• Bond the fusible knit interfacing on the wrong side of the hole.
• Select stitch #1 and attach Foot #9. Lower the feed dogs.
• Hoop fabric to prevent distortion. Stitch, moving the hoop without pressure.
BERNINA
M Y
ASTERING OUR
MENDING TEARS AND HOLES
Denim - 4" x 6"
Fusible Knit Stabilizer, 2" x 2"
90/14 Universal or Jeans
To suit the fabric
Reverse Pattern Foot #1C and
Automatic Buttonhole Foot with Slide #3A and
and Darning Foot #9 (optional accessory)
®
8/15/02
BERNINA
S E
ECTION
®
artista 200
artista 200/79