Bernina artista 200 Owner's Workbook page 67

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Foot:
• Trim fabric edges with wavy rotary cutter before sewing.
• Select stitch #1 - SL 1mm-5mm. The longer the stitch length, the deeper the pleat.
• Select center needle position.
• Set the adjustment lever on the attachment at 1.
• Place the 16" length of fabric (the piece to be ruffled) wrong side up between the two blades,
snugging it against the edge of the seam guide slot, making sure it is slightly beyond the needle.
• Lower the foot and begin sewing; stitch for 2" to 3". If gathers are too deep, turn the adjusting
screw counter clockwise; if too shallow, turn the screw clockwise.
• Insert the 6" length of fabric (the flat piece) under the Ruffler, right side up, through the seam
guide slot. Keep both edges aligned with the right side of the slot.
• Stitch, keeping speed steady.
• Trim and mount sample.
Note: Loosening the needle tension to 3-4 will allow some subsequent adjustment of fullness.
BERNINA
M Y
ASTERING OUR
RUFFLER
Medium weight cotton - one 4" x 16", one 4" x 6"
80/12 Universal
All-purpose sewing
Ruffler Attachment #86 (optional accessory)
®
8/15/02
BERNINA
S D
ECTION
®
artista 200
artista 200/67