Bernina artista 200 Owner's Workbook page 139

M
ASTERING
Y
OUR
BERNINA
®
CORDED LARGE SCALLOP EDGING
Fabric: Firm, woven fabric, 8" x 10"
Stabilizer: 1 piece heavy tear-away, 4" x 10"
1 yard decorative cord (perle cotton,
Pearl Crown Rayon, Candlelight)
Needle: 90/14 Embroidery
Thread: 30 wt. cotton embroidery
Presser Foot: Sideways Motion Foot #40C and
Embroidery Foot #6 (optional acc.)
• Fold fabric to 4" x 10"; insert stabilizer between
fabric layers.
• Access Combi Mode; combine the following:
- stitch #507, default settings
- stitch #507, Vertical Mirror Image
- stitch #39, CDL2 - 1x, between the scallops
- engage Long Stitch function
- stitch #39, CDL14 - 1x after second scallop
- engage Long Stitch function
• Save the combination.
• Stitch.
• Access Single Mode sewing.
• Trim fabric from one side of the sewn scallop
edging, leaving approximately
the edge.
• Select stitch #2, SL = 1.5mm, SW = 1.5mm.
• Insert the decorative cord into the hole in the front
of Embroidery Foot #6; attach foot to machine.
• Engage Needle Stop Down.
• Carefully couch cord in place along the trimmed
edge.
• Trim and mount sample.
Note: The Directional Stitching exercises in this
workbook were created on the artista 200.
Some adjustments to the stitch combination
formulas may be necessary depending on
the fabric, thread, and stabilizer used to create
the sample.
BERNINA
M Y
ASTERING OUR
1
/ " of fabric along
8
®
8/15/02
BERNINA
S I
ECTION
®
artista 200
artista 200/139