Bernina artista 200 Owner's Workbook page 114

M
ASTERING
Y
OUR
BERNINA
®
Outer Rectangle
• Using a temporary spray adhesive, bond the
stabilizer to the muslin.
• Scroll to select the first section of your stitch
combination.
• Activate Pattern Repeat 1x; sew. At the end of the
combination, tap the needle down using the foot
control.
• Pivot 90º; tap the needle up.
• Scroll to the second part of the combination.
• Activate Pattern Repeat 2x; sew. The artista 200
will automatically stop after two repeats. Note that
with the Sub-Divider feature, ONLY the selected
combination will sew in a repetitive manner.
• When the second combination is complete, tap the
needle down using the foot control.
• Pivot 90º; tap the needle up.
• Scroll to the first section of the stitch combination.
• Activate Pattern Repeat 1x; sew. At the end of the
combination, tap the needle down.
• Pivot 90º; tap the needle up.
• Scroll to the second section of the combination.
• Activate Pattern Repeat 2x; sew. This completes
the stitching of the rectangle.
Center Motif
One of the unique features of the artista 200
is the Preview option.
• Touch the Multifunction symbol.
• Select the Preview option. Notice that all of the
parts of the combination are numbered.
• From the entire combination, select the 9th stitch
pattern (tulip).
• After the stitch is selected, Preview automatically
closes. The machine will automatically begin
stitching the combination at this point when stitch-
ing is resumed.
• The center motif is about 4" long. Draw a line
through the center of the stitched rectangle; sew
the center motif. To perfectly end the motif, press
the Pattern End button on the machine.
BERNINA
M Y
ASTERING OUR
®
8/15/02
BERNINA
®
artista 200
artista 200/114