Bernina artista 200 Owner's Workbook page 115

M
ASTERING
Y
OUR
BERNINA
®
Before starting the sampler, prepare the following - - -
Using a spray adhesive such as 505, adhere the stabilizer to the muslin
•
Mark the muslin fabric for four stitching rows. Rows can be spaced approximately 1" apart. Also
•
add center perpendicular line.
After creating your combination in Combi Mode, stitch out the separate rows of stitching to get the
•
approximate length of each row. Using the central line, measure off half of the length for each row
of stitching on each of the four lines of text. That will give you an approximate starting point to line
up your presser foot.
Combine the following:
Access Combi Mode
•
Select the Alphabet Main Category button
•
Select the "Double Block" alphabet
•
Enter: Quilted_with
•
(Use the NEW Upper case/Lower case function to combine both capital and lower case letters.)
Select the "Heart" (Stitch #517) one time.
•
Insert the Securing function at the beginning and end of the line of text
•
At the end of this first line of text, enter the NEW Combination Sub-division. This will act as a STOP
•
in between the lines of text so that you may re-position your fabric easily. When the foot control is
depressed again, the cursor automatically moves to the beginning of the next line of text. You DO NOT
have to engage Pattern Repeat 1x.
Enter the rest of the lines of text in the same manner as the first line, using the Combination
•
Sub-division between each different line and at the end of the final line of text.
Text ideas - - -
•
Instead of "Quilted with" substitute - - - "Crafted with" OR "Hand-made with" OR "Sewn with"
BERNINA
M Y
ASTERING OUR
COMBI MODE CREATIVE LABEL
SUBDIVISION EXERCISE
Fabric:
Stabilizer:
Needle:
Thread:
Presser Foot:
®
8/15/02
BERNINA
Heavy Muslin, 9" x 7"
Tear-away as needed
90/14
30 weight embroidery
Reverse Pattern Foot #1C
Quilted with
By
(Your name)
July 2002
®
artista 200
artista 200/115