Remote Access Code - AT&T CL83101 User Manual

Answering system
Answering system settings

Remote access code

To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access code
is 19.
To change the remote access code:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q or p
CID
press /SELECT.
MENU
3. Press q or p
CID
press /SELECT.
MENU
4. Press q or p
CID
/SELECT.
MENU
5. Use the dialing keys to enter a
/DELETE to backspace and delete a digit.
MUTE
6. Press /SELECT to save the setting. You hear a
MENU
confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
SELECT
2. Press q or p
CID
/SELECT.
press
MENU
3. Press q or p
CID
press /SELECT.
MENU
4. Press q or p
CID
press /SELECT.
MENU
5. Use the dialing keys to enter a
X/DELETE to backspace and delete a digit.
/SELECT to save the setting. You hear a
6. Press
MENU
confirmation tone.
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to scroll to >Remote code, then press
DIR
to enter the main menu.
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to scroll to >Remote code, then
DIR
two-digit number. Press
two-digit number. Press
72
Play messages
>Answering sys
to
SELECT
Answer ON/OFF
>Ans sys setup
REMOTE CODE
Play messages
>Answering sys
Answer ON/OFF
>Ans sys setup
REMOTE CODE
p
q
p
q
19
p
q
p
q
19