Ptt Call To Multiple Devices - AT&T CL83101 User Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to multiple devices

When there are multiple handsets registered to the phone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-five calls
when one to five handsets are registered, and a maximum of one-to-four
calls when six or more handsets are registered. The first four registered
handsets will be able to use this feature. Other handsets can only use PTT for
one-to-one calls.
To call multiple devices:
Using a cordless handset:
1. You have three ways to call multiple devices. When the handset is not in use:
Press and hold PUSH TO TAL� until the handset shows
•
Connecting to group...
Press PUSH TO TAL�. Press q
•
/SELECT or press PUSH TO TAL� then your handset shows
MENU
Connecting to group...
• Press PUSH TO TAL�. Press TONE and # (pound key). The handset
shows Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold PUSH TO TAL� when you want to speak.
Speak towards the handset. Your voice is broadcast to all devices.
3. Release PUSH TO TAL� after speaking.
4. Any extension can reply (see Answer a PTT call on page 46).
Using the telephone base:
1. You have three ways to call multiple handsets. When the telehone base is
not in use:
Press and hold PTT until the screen shows Connecting to group...
•
Press PTT. Press q
•
press PTT then the telephone base shows Connecting to group...
• Press PTT. Press TONE and # (pound key). The screen shows
Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold PTT when you want to speak. Speak towards
the telephone base. Your voice is broadcast to all devices.
3. Release PTT after speaking.
4. Any extension can reply (see Answer a PTT call on page 46).
NOTE: After PUSH TO TAL� on the handset or PTT on the telephone base is released, the PTT
call remains open for a short time. If no one presses PUSH TO TAL� on the handset or PTT on
the telephone base within 10 seconds, the PTT call ends automatically.
or p
CID
or p to choose Group. Press
CID DIR
45
to choose Group. Press
DIR
/SELECT or
MENU