Multiple handset use
Intercom
Using the telephone base:
1.
Press MENU/
menu. Press q
press
/SELECT.
MENU
•
If you have one handset, the telephone base shows
Calling HANDSET X.
•
If you have more than one handset, the telephone
base shows
enter a specific handset number (1-9 for handsets
1-9,
TONE and 0 for handset 10, TONE and 1 for
handset
11,
TONE and # for all handsets),
p
to scroll to the desired handset and press
DIR
/SELECT.
MENU
HANDSET X or Calling all devices.
The destination handset(s) rings and shows BASE 0 is calling.
2. To answer the intercom call, press
dialing key (0-9, TONE
and the handset now show Intercom.
3. To end the intercom call, one party presses
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
NOTES:
•
Before the intercom call is answered, you can cancel it by pressing
handset or CANCEL on the telephone base. .
•
If the called device is not answered within 100 seconds, or accessing the directory or caller ID
log, or is on a call, or is out of range, the initiating device shows No answer. Try again.
•
To temporarily silence the intercom ringer, press
handset, or press CANCEL or MUTE on the telephone base.
•
You can only use one pair of devices at a time to make intercom calls.
Answer an incoming call during an intercom call
If you receive an outside call during an intercom call, there is a two-beep call
waiting tone.
•
To answer the call, press
handset, or
automatically. The party on the intercom call hears four beeps.
system devices can also answer the incoming call by pressing
PHONE /
FLASH
telephone base .
•
To end the intercom call without answering the incoming call, press
OFF /
CANCEL
in idle mode to enter the main
SELECT
or p
to scroll to >Intercom, then
CID
DIR
INTERCOM
TO:
TONE and 2 for handset 12, or
The telephone base shows Calling
or # ) on the destination handset. Both the base
PHONE /
/SPEA�ER
SPEA�ER on the telephone base. The intercom call ends
/SPEA�ER
SPEA�ER on the handset or
or
on the handset or CANCEL on the telephone base
Use the dialing keys to
or press
q
CID
PHONE/
FLASH
OFF/CANCEL or MUTE/
or
FLASH
40
HANDSET X
is calling
Intercom
or
,
/SPEA�ER
SPEA�ER or any
OFF/
, or place the
CANCEL
/CANCEL
CANCEL on the
OFF
DELETE
/SPEA�ER
SPEA�ER on the
/SPEA�ER
SPEA�ER on the
Calling
BASE
on the
Other
.