Stop Recording - Yamaha PSR-520 Product Manual

Song Recording
4
Record ..............................................................
Recording will begin as soon as you play a note on the keyboard or
press the SONG [PLAY/STOP] button, and the BEAT indicator dots will
begin to indicate the current beat as in the Auto Accompaniment mode. The
MEASURE parameter will also show the current measure number. The
[REC] indicator lights continuously once recording has started.
5

Stop Recording

Stop recording by pressing the SONG [PLAY/STOP] button. The
[REC] indicator will go out and the MEASURE number on the display will
return to "01".
The melody track voice number and volume settings will appear on the
display.
........................................................
Whenever you record using the
SONG MEMORY, any previously
recorded material in the same
track will be erased.
If you start recording by pressing
the [PLAY/STOP] button, nothing
will be recorded until you begin
playing on the keyboard.
Melody Track data can be
cleared by pressing the [PLAY/
STOP] button to start recording
and stop it without playing the
keyboard (Melody Track Data
Clear).
Recording is carried out in 1-
measure increments. you stop
If
recording in the middle of a
measure, rests will automatically
be recorded until the end of that
measure.
If the SONG MEMORY becomes
full while recording, "Full" will
appear on the display and re-
cording will stop.
If you want to re-record the
Melody track which "Full" was
shown on the display during
recording, execute "Melody Track
Data Clear" operation (see
above) before recording.
Only VOICE function voice num-
bers are shown in the melody
track displays (dual voice num-
bers are not shown).