Setting The Reverb Return Level - Yamaha PSR-520 Product Manual

2
Select the Reverb Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use the cursor
select one of the 13 reverb types using the [-/NO] and [+/YES] buttons, the
number buttons or the data dial. The name of the selected reverb type ap-
pears on the top line of the display.
You can also enter the Reverb Type function by pressing and holding the
[REVERB] button until the arrow jumps to the "DIGITAL EFFECT" posi-
tion and the current reverb type name appears in the display.
3
Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.
The reverb return level determines the amount of "wet" (affected) signals output to the amplifier.
1
Select the Reverb Return Level Function....................
Press the [FUNCTION] button to the left of the display as many times
as necessary until the arrowhead in the display appears next to "DIGITAL
EFFECT" in the function list to the left of the display, and use the cursor
and
buttons to select the Reverb Return Level function.
2
Set the 'Reverb Return Level .........................................
Use the [-/NO] and [+/YES] buttons, the number buttons or the data dial
to set the desired reverb return level. The range is from "00" to "127".
3
Exit ..............................................................................
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.
button to enter the Reverb Type function and then

Setting the Reverb Return Level

Digital Effects
•
See page 79 for a complete
listing of the reverb types.
•
The reverb type can be reset to
its default by simultaneously
pressing the [-/NO] and [+/YES]
buttons.
•
You can return to the previous
display, "Reverb →, by pressing
the cursor
button, and
choose the CHORUS or DSP
effect.
•
The Reverb type will change
automatically whenever a differ-
ent style is selected.
•
If you want to disable the reverb
effect for all the data excepting
VOICE function voice, select
OFF in the Type selection.
The Reverb Types
01~04 Hall 1~4
Room 1~4
05~08
09, 10 Stage 1, 2
11, 12 Plate 1, 2
13 OFF
•
See page 78 for more details on
the Digital Effects.
•
The reverb return level desig-
nated here affects the entire
setting, while the reverb send
level can be applied to voice
the
selected via the VOICE function,
the split voice and the dual voice
separately via the "'RevLevel" in
the OVERALL function group, the
"S. RevLvl" in the SPLIT VOICE
function and the "D. RevLvl" in the
DUAL VOICE function (see
68, 16 and 19).
pages
•
The default reverb return level =
64 can be recalled instant/y by
pressing both the [-/NO] and [+/
YES] buttons simultaneously.