Recording A Melody Track; Start Recording; Stop Recording - Yamaha PortaTone EZ-30 Owner's Manual

Song Recording

Recording a melody track:

While pressing and holding down the [RECORD] button, select the desired
melody track button (1–5). The selected track's number flashes on the
display.

Start recording.

You can start recording simply by playing the keyboard (or by pressing the
[START/STOP] button).
The current measure number is indicated on the display during recording.

Stop recording.

After you've finished playing the part, press the [START/STOP] or [RECORD]
button.
When you press the [INTRO/ENDING] button while recording the accompa-
niment track, the EZ-30 plays the Ending section and stops recording.
When recording is finished, the measure number on the display is reset to
"001" and the recorded tracks DATA indicators light up.
Record to other tracks as desired.
To do this, simply repeat steps #2–#4 above. Make sure that when you press
the [SONG MEMORY] button corresponding to the desired track, the track
number in the display flashes.
68
• If auto accompaniment is turned on and the accompaniment track is not
recorded, a melody track and the accompaniment track will automatically be
selected as recording tracks. If you wish to record only the accompaniment track,
press the button for the flashing melody track indicator to deselect the melody
track. The melody track indicator is turned off.
• To cancel recording, press the button for the flashing track indicator. The track
indicator is turned off.
or