Select A Voice - Yamaha PSR-520 Product Manual

3

Select a Voice ................................................................

The PSR-520 has 149 voices that can be selected by using either the [-/
NO] and [+/YES] buttons, the number buttons or the data dial. The voices
are listed in the VOICE list printed at the top of the instrument's control
panel. The number and name of the currently selected voice appears on the
top line of the display panel while the VOICE function is selected.
The [-/NO] and [+/YES] Buttons
When the VOICE function is selected these buttons step up or down
through the PSR-520's voices. Press either button briefly to step to the
next voice in the corresponding direction, or hold the button to scroll
rapidly through the voices in the corresponding direction.
The Number Buttons
The number buttons can be used to directly enter the number of the de-
sired voice, thereby immediately selecting that voice without having to
step through a number of other voices.
Two-digit voice numbers (i.e. "01" through "99") are selected simply by
entering the two digits in sequence -e.g. to select voice number "57",
briefly press the [5] buttons and then the [7] button.
Three-digit voice numbers (i.e. "100" through "149") are entered by first
pressing and holding the [l] button until "1" appears in the hundreds
position on the display, then press the remaining two digits in sequence.
Playing the PSR-520
•
Voice numbers 150~151 exclu-
sively can be used as the dual
voice — see page 19.
•
Whenever you select a new
voice, the appropriate voice-
related parameters for that voice
will be set automatically. This is
the PSR-520 Voice Set function.
The Voice Set function can be
turned OFF if not required —
page 69.
•
The stereo pan position of the
voice can be set via the "Pan"
function in the OVERALL func-
tion group — see page 68.