Recording To A Specified Track; Stop Recording - Yamaha PSR-E323 Owner's Manual

Yamaha psr-e323: user guide
Hide thumbs Also See for PSR-E323:
Table of Contents

Advertisement

Record your own performance
3

Stop recording.

Pressing the [START/STOP] button stops recording and writes the data
to the User Song. (A "Writing!" message is shown.)
To playback the newly recorded performance, press the [START/
STOP] button.
● In order to record with the Style, turn the Auto Accompani-
ment to on (see Step 4 on page 20), and then record accord-
ing to the instructions.
● In order to record only your performance, turn the Auto Accompa-
niment to off and record according to the normal steps.
Recording to a specified track
The User Songs are organized into two tracks: Track 1 and Track 2. You
can specify the track you want to record to.
About track recording
If you start recording by specifying a track, the track will be overwritten
(existing data in the track is deleted and replaced with the new recording).
Data that can be
recorded to Track 2
Style playback* (including
chord changes) or your
own keyboard performance
* When playing
the Style
Only your keyboard performance can be recorded to Track 1. Either a Style
or your performance can be recorded to Track 2, resulting in a User Song
like that depicted below.
User Song
Track 2
Style
38
PSR-E323/YPT-320 Owner's Manual
(The "ACMP ON" lights.)
(The "ACMP ON" is unlit.)
User Song
Data that can be
recorded to Track 1
Your own keyboard
performance only
Track 1
Track 2
Your own keyboard
Your own keyboard
performance
performance
Recording to the
specified track
User Song
Track 1
Your own keyboard
performance
CAUTION
• Never attempt to turn the
power off when a "Writ-
ing!" message is shown
in the display. Doing so
can damage the flash
memory and result in a
loss of data.
NOTE
• Use the Musicsoft
Downloader to backup the
User Songs to a computer
(page 60).
NOTE
• Record following the steps
in the previous page, and
your performance will be
recorded to Track 1 and the
Style (if you are playing
one) will be recorded to
Track 2.
NOTE
• You cannot record the
Reverb Level, metronome
click, or the Transpose and
Tuning settings.
• The settings and buttons
below cannot be changed,
or if changed, the new set-
tings cannot be recorded if
entered during the record-
ing process.
ACMP ON/OFF, split
point, reverb type, chorus
type, harmony type,
[FUNCTION] button,
[PORTABLE GRAND]
button.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ypt-320Ypt320ms

Table of Contents