Changing The Dsp Effect - Yamaha PSR-520 Product Manual

Digital Effects
1
Select the DSP Type Function
Press the [FUNCTION] button to the left of the display as many times
as necessary until the arrowhead in the display appears next to "DIGITAL
EFFECT" in the function list to the left of the display, and use the cursor
and
buttons to select the DSP Type function, "Dsp
2
Select the DSPType
Use the cursor
one of the 46 DSP types using the [-/NO] and [+/YES] buttons, the number
buttons or the data dial. The name of the selected DSP type appears on the
top line of the display.

Changing the DSP Effect

Selecting the DSP Effect Type
......................................................
.....................................................
button to enter the DSP Type function and then select
The DSP Types
01~04 Hall 1~4
05~08 Room 1~4
09, 10 Stage 1, 2
11, 12 Plate 1, 2
13, 14 Early 1, 2
Reflection
15 Gate Reverb
16 Reverse Gate
Chorus 1~5
17~21
Flanger 1~4
22~25
Symphonic
26
27 Phaser
Rotary Speaker 1~5
28~32
33, 34 Tremolo 1, 2
Guitar Tremolo
35
36
Auto Pan
37 Auto Wah
38 Delay L, C, R
39 Delay L, R
40 Echo
Cross Delay
41
Distortion Hard
42
43 Distortion Soft
EQ Disco
44
45 EQ Telephone
OFF
46
•
See page 79 for a complete
listing of the DSP types.
•
The DSP type can be reset to its
default by simultaneously press-
ing the [-/NO] and [+/YES] but-
tons.
•
If the Voice Set function is ON
(page 69) the DSP type will
change automatically whenever a
different voice is selected via the
VOICE function.
•
When the Rotary Speaker 1~5 is
selected, the [DSP VARIATION]
button (ON/OFF) will switch the
speed of the rotating speaker
between fast (ON) and slow
(OFF).
•
You can return to the previous
display, "Dsp by pressing the
cursor button, and choose
the REVERB or CHORUS effect.
•
If you want to disable the DSP
effect for all the data excepting
VOICE function voice, select
OFF in the Type selection.