Transposition - Yamaha PSR-520 Product Manual

This functions allow the overall pitch of the PSR-520 to be transposed up or down by a maximum of one
octave in semitone increments.
1
Move the Cursor to theTranspose Value
Use the CURSOR buttons to select the number to the right of the key-
board icon labelled "TRANSPOSE" on the display (the number will flash
when selected).
2
Set the Transposition As Required
Use the [-/NO] and [+/YES] buttons, the number buttons or the data dial
to set the desired degree of transposition. The transpose range is from -12 to
+12, allowing a maximum upward or downward transposition of 1-octave.
A setting of "0" produces the normal pitch.
The PITCH BEND wheel to the left of the keyboard allows the pitch of
notes played on the keyboard to be bend up or down - roll the wheel away from
you to bend up, and toward you to bend down.
The actual pitch bend range can be adjusted via the "PBRange" function in
the OVERALL function group (page 70).

Transposition

......................................
.....................................
Pitch Bend
P l ay i n g th e P SR- 520
•
Press the [-/NO] and [+lYES]
buttons simultaneously to in-
stantly reset the transpose value
to "0".
• The new transpose value will
apply from the next note played.
• Negative values can be entered
by pressing the number buttons
while holding the [-/NO] button.