Pc Health Status - DFI-ITOX NP100-N16C User Manual

PC Health Status

Case Open Warning
Shutdown Temperature
Current System Temperature
Current CPU Temperature
Current System Fan Speed
Vcore
5V
1.05V
1.8V
+12V
VBAT (V)
: Move Enter: Select
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identical to
this one.
Case Open Warning
Set this field to Enabled to allow the system to alert you of a chassis intrusion
event.
Shutdown Temperature
You can prevent the system from overheating by selecting a temperature at
which the system will shutdown. If the system detected that its temperature ex-
ceeded the one set in this field, it will automatically shutdown. This function will
work only if your operating system supports the ACPI feature.
Current System Temperature to VBAT (V)
These fields will show the temperature, fan speed and output voltage of the
monitored devices or components.
Note:
The onboard hardware monitor function is capable of detecting "system
health" conditions but if you want a warning message to pop-up or a
warning alarm to sound when an abnormal condition occurs, you must
install the Hardware Monitor for Windows utility. This utility is included in
the CD that came with the system board. Refer to the Hardware Monitor
for Windows section in chapter 4 for more information.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Disabled
Disabled
32 C/89 F
o o
41 C/105 F
o o
0 RPM
0.90V
5.04V
1.06V
1.81V
11.88V
3.24V
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level

ESC: Exit F1: General Help
F7: Optimized Defaults
3
83