Onboard Device - DFI-ITOX NP100-N16C User Manual

Onboard Device

Move the cursor to this field and press <Enter>. The following screen will appear.
Onboard LAN1 Control
Onboard LAN2 Control
Onboard PXE ROM Control
Azalia Audio Control
USB Device Setting

: Move Enter: Select
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identical to
this one.
Onboard LAN1 Control and Onboard LAN2 Control
These fields are used to enable or disable the onboard LAN controllers.
Onboard PXE ROM Control
Enable this field if you wish to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you wish to
change the boot ROM's settings, type the <Shift> and <F10> keys simulta-
neously when prompted during boot-up. Take note: you will be able to access
the boot ROM's program (by typing <Shift> + <F10>) only when this field is
enabled.
Azalia Audio Control
Enabled
Enables the onboard Azalia CODEC.
Disabled
Disables the onboard audio. Disable the onboard audio when using an audio
PCI card.
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
Enabled
Enabled
Disabled
Enabled
Press Enter
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level

ESC: Exit F1: General Help
F7: Optimized Defaults
3
73