DFI-ITOX NP100-N16C User Manual page 69

Boot Display
This field is used to select the type of display to use when the system boots.
CRT
Select this option if you want the system to boot the CRT display.
LVDS
Select this option if you want the system to boot the LCD flat panel display.
CRT+LVDS
Select this option if you want the system to boot both the CRT and LCD flat
panel display.
DVI
Select this option if you want the system to boot the NP1-DVI daughter-
board's DVI-D's display.
CRT+DVI
Select this option if you want the system to boot both the CRT and NP1-DVI
daughterboard's DVI-D's display.
Panel Scaling
This options are Auto, On and Off.
Panel Number
This field is used to select the type of panel that you are using.
3
BIOS Setup
69