DFI-ITOX NP100-N16C User Manual page 72

3
BIOS Setup
On-Chip Serial ATA
Disabled
Disables the onboard SATA.
Auto
The system will detect the existing SATA and IDE drives then automatically
set them to the available master/slave mode.
Combined Mode
This option allows you to combine both IDE and SATA drives; supporting
maximum of 2 drives on each channel.
Enhanced Mode
This option allows you to use both IDE and SATA drives; allowing a maximum
of 4 drives - 1 IDE Master, 1 IDE Slave and 2 SATA.
SATA Only
This option automatically sets the SATA drives to Primary Master mode. Since
the SATA drives are in Master mode, you cannot set the IDE drive to Master
mode.
PATA IDE Mode and SATA Port
This field is used to select the function mode for the IDE connector and its
relation to the SATA ports.
Primary
IDE serves as Primary Master and Primary Slave channel. SATA 1 and SATA 2
serve as Secondary Master and Secondary Slave channel.
Secondary
IDE serves as Secondary Master and Secondary Slave channel. SATA 1 and
SATA 2 serve as Primary Master and Primary Slave channel.
72