4
Supported Software
AHCI for F6 During Windows Setup Floppy Driver
This is used to create a floppy driver diskette needed when you install Windows
XP using the F6 installation method. This will allow you to install the operating
system onto a hard drive when in AHCI mode.
Click "AHCI for F6 During Windows Setup Floppy Driver" on the main menu.
1. I n s e r t
diskette then click OK.
2. Make sure you have a
backup of the data in the
disk. Clicking Yes will erase
all data.
3. The system is currently
formatting and writing the
necessary driver files into
the diskette.
128
a
b l a n k
f l o p p y
®