Chapter 1 - Introduction; Specifications - DFI-ITOX NP100-N16C User Manual

1
Introduction

Chapter 1 - Introduction

Specifications

Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
IDE
Rear Panel I/O
Ports
10
• Intel Atom N270 (Diamondville SC) processor
® TM
• 1.6GHz core frequency, 1.10V voltage
• 2.5W thermal design power
• 512KB on-die second level cache
• 533-MT/s FSB
• 22x22 mm, 1.0 mm ball pitch and 437 balls FCBGA
• Intel chipset
®
- Northbridge: Intel
- Southbridge: Intel
• One 240-pin DDR2 DIMM socket
• Maximum memory supports up to 2GB
• Supports 400MHz and 533MHz DDR2 SDRAM
• 1 PCI Express x1 slot
• 1 PCI slot
• 133/166MHz internal graphics core render frequency at
1.05V core voltage
• One SDVO port (Port B)
- SDVO slot reversal not supported
• Supports 18-bit dual-channel LVDS
• Supports CRT resolutions up to SXGA+
• Realtek ALC262 2-channel High Definition Audio
• Two 24-bit stereo DACs and three 20-bit stereo ADCs
• S/PDIF input/output interface
• Two Realtek RTL8111C PCI Express Gigabit controllers
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) com-
pliant
• Two SATA ports with independent DMA operation supported
on ports 0 and 2
• Two-mode operation supports legacy mode using I/O space
or an AHCI mode using memory space
• SATA and PATA can be used in a combined function mode
(When SATA is used with PATA, AHCI mode is not support-
ed.)
• Bus Master IDE (PATA) controller
• Supports up to two IDE devices
• Ultra ATA 100/66/33
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 2 DB-9 serial ports
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal only)
• 2 RJ45 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line-out
945GSE GMCH
®
82801GBM ICH7M
®