DFI-ITOX NP100-N16C User Manual page 62

3
BIOS Setup
CPU Feature
This field is used to configure the CPU that is installed on the system board.
Move the cursor to this field then press <Enter>.
Delay Prior to Thermal
Limit CPUID MaxVal
C1E Function
Execute Disable Bit
: Move
↑↓
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identical to
this one.
Delay Prior To Thermal
This field is used to select the time that would force the CPU to a 50% duty
cycle when it exceeds its maximum operating temperature therefore protect-
ing the CPU and the system board from overheating to ensure a safe com-
puting environment..
Limit CPUID MaxVal
The CPUID instruction of some newer CPUs will return a value greater than 3.
The default is Disabled because this problem does not exist in the Windows
series operating systems. If you are using an operating system other than
Windows, this problem may occur. To avoid this problem, enable this field to
limit the return value to 3 or lesser than 3.
C1E Function
The options are Auto and Disabled.
Execute Disable Bit
When this field is set to Disabled, it will force the XD feature flag to always
return to 0.
62
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
16 Min
Disabled
Auto
Enabled
PU/PD/+/-: Change Priority
F6: Fail-Safe Defaults
Item Help
Menu Level

F10: Save ESC: Exit
F7: Optimized Defaults