Installation - Polaroid M402b Repair Manual

M402b MiniPortrait Camera Repair Manual

Installation

1. Insert the shutter actuator onto its locating pin on the right shutter actuator guide.
Note: While replacing the shutter actuator be careful not to misalign
the shutter and the diaphragm plates.
If the shutter and the diaphragm plates are misaligned during the
replacement of the shutter actuator, refer to the Shutter and Diaphragm
Plate assembly/disassembly procedure to properly realign (see page 24).
2. Using a pair of small needle nose pliers, place the shutter actuator return spring onto the
plastic post on the right shutter actuator guide.
3. Connect the shutter actuator return spring to the shutter actuator.
4. Using a pair of small needle nose pliers, place the washer and clip onto the plastic post
on the right shutter actuator guide to secure the shutter actuator return spring and shutter
actuator.
5. Install the front cover assembly (Figure 2-1).
23
Disassembly/Assembly