Table of Contents
Advertisement
M402b MiniPortrait Camera Repair Manual
Camera Back Interface Plate
Removal
1. Remove the camera back (Figure 2-3).
2. Using a Phillips head screw driver, remove the twelve (12) flat head screws that secure
the camera back interface plate to the camera body.
3.
Lift off the camera back interface plate from the camera body.
Camera
Installation
1. Position the camera back interface plate onto the camera body.
2. Using a Phillips head screw driver, install and tighten the twelve (12) flat head screws that
secure the camera back interface plate to the camera body.
3. Install the camera back (Figure 2-3).
(Figure 2-4)
Camera Back
Latch
Body
Figure 2-4. Removing camera back interface plate
Camera Back
Interface Plate
15
Disassembly/Assembly
Camera
Back
Advertisement
Table of Contents
