X-Sync Connector Plate/X-Sync Switch; Removal; Removing X-Sync Connector /X-Sync Switch - Polaroid M402b Repair Manual

M402b MiniPortrait Camera Repair Manual
X-Sync Connector/X-Sync Switch

Removal

1. Remove the front cover assembly (Figure 2-1).
2. To remove the X-sync connector:
• Using a soldering iron and a solder sucker, remove the wires from the X-sync
connector.
• Using a Phillips head screw driver, remove the two (2) screws that secure the
X-sync connector to the front cover. Lift off the X-sync connector.
3. To remove the X-sync switch:
• Using a soldering iron and a solder sucker, remove the orange and black wires from
the X-sync switch.
• Using a Phillips head screw driver, remove the two (2) screws that secure the X-sync
switch to the front cover. Lift off the X-sync switch.
Rear View of Front Cover
Figure 2-6. Replacing x-sync connector/x-sync switch
(Figure 2-6)
X-Sync Connector
Front Cover
18
Disassembly/Assembly
Black Wires
Red Wire
Orange
Wire
X-Sync Switch