Installation - Polaroid M402b Repair Manual

M402b MiniPortrait Camera Repair Manual
9. Using a Phillips head screw driver, remove the two (2) screws that secure the bottom of
the inside viewfinder hand grip to the hand grip base.
10. Using a Phillips head screw driver, remove the two (2) screws that secure the inside
viewfinder hand grip to the side of the camera body.

Installation

1. Using a Phillips head screw driver, install and tighten the two (2) screws that secure
the inside viewfinder hand grip to the side of the camera body.
2. Using a Phillips head screw driver, install and tighten the two (2) screws that secure the
bottom of the inside viewfinder hand grip to the hand grip base.
3. Using a Phillips head screw driver, install and tighten the three (3) screws that secure the
hand grip base cover to the hand grip base.
4. Screw the tripod adapter screw into the hand grip base.
5. Install the outside viewfinder hand grip.
6. Using a Phillips head screw driver, install and tighten the screw that secures the center of
the outside viewfinder hand grip to the center of the inside viewfinder hand grip.
7. Using a Phillips head screw driver, install and tighten the two (2) screws that secure the
rear of the outside viewfinder hand grip to the rear of the inside viewfinder hand grip.
8. Install the rubber eyepiece.
9. Install the front viewfinder bezel.
10. Attach the cable release to the shutter button.
17
Disassembly/Assembly