Polaroid M402b Repair Manual page 11

M402b MiniPortrait Camera Repair Manual
3. Using a Phillips head screw driver, install and tighten the six (6) screws that secure the
front cover and the shutter plate assembly to the camera body.
When installing the front cover make sure:
• the four (4) fine thread screws are used to secure the top of the front
cover and the shutter plate assembly to the camera body.
• the two (2) coarse thread screws are used to secure the bottom of the
front cover and the shutter plate assembly to the camera body.
4. Install a new upper decal cover and lower decal cover making sure that they are properly
positioned on the front cover.
5. Install the aperture knob to the aperture drive gear.
Note: If necessary, recalibrate the camera as explained in Section 3 of
this Repair Manual.
6. Install the four (4) lens caps to the front cover lenses.
CAUTION
11
Disassembly/Assembly