Eject Sensor/Micro-Sw - Oki MC760 Maintenance Manual

Oki Data CONFIDENTIAL

4.2.24 Eject sensor/Micro-SW

(1) Remove the eject Assy. (See section 4.2.17)
(2) Disengage the claws (2 places), and disassemble the Assy into guide eject
lower ① and guide eject upper ② .
(3) Remove the lever eject sensor ③ and spring-SNS(F/R) ④ and eject sensor ⑤ .
(4) Remove the micro-SW ⑥ and cable ⑦ .
45376001TH Rev.1
4.2.25 Antenna (for wireless model only)
(1) Remove the screw (silver, No:42920408) ① .
(2) Remove the FAX PCB.(See section 4.2.9)
(3) Remove the two clamp-cable and core and disconnect the connector.
(4) Remove the Antenna ② .
4. Component replacement
Clamp
Core
Clamp
89 /