Oki MC760 Maintenance Manual page 62

Oki Data CONFIDENTIAL
For Mac OS X
When the optional device has been added into in Mac OS X before installing the
printer driver, the device information is gotten automatically. However, if the printer
is connected by [IP print] and [Bonjour], the device information could not be gotten
automatically.
If the printer is connected by [AppleTalk], the device information could also not be
gotten automatically when the optional device has been added into in Mac OS X
before installing the printer driver.
Please inish the following setting procedure for above.
45376001TH Rev.1
Open System Preferences and click [Print & Scan].
Select [OKI-MC780], click [Options & Supplies].
Click [Driver].
Set the following options.
• Model Selection - Choose this for using your model.
• Finisher
Not Installed ― Select this if a finisher is not installed.
Inner Finisher (1 Tray) ―- Select this when the Inner Finisher is installed.
Notes!
• Even if you choose [Not Installed] for the Finisher option during print
settings, the inisher options such as stapling can be selected. If you
select the finisher options for printing but the finisher is not installed,
inisher settings will be ignored and printing will be performed correctly.
• Trays
Tray 1
Select this when the tray 1 is installed.
Tray 1 and 2
Select this when the tray 1 and 2 are installed.
Tray 1, 2 and 3
Select this when the tray 1, 2 and 3 are installed.
Tray1, 2, 3 and 4
Select this when the tray 1, 2, 3 and 4 are installed.
Click [OK].
3. Set up
61 /