How To Enter Ship Speed - Furuno FCR-21x9-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.14

How to Enter Ship Speed

The TT and azimuth stabilized presentation modes require own ship speed input and
compass signal. The speed can be entered automatically from a speed log (STW,
SOG) or GPS (SOG), or manually on the menu. Note that the FURUNO GPS Naviga-
tor GP-150 provides COG and SOG.
1. Right-click anywhere in the Sensor information box to show the context-sensitive
menu.
ng]
Select Sensor
[OS Info Menu]
2. Click [Select Sensor] then click [Setting].
3. Use the arrow buttons to select the [SPD] page.
Select to use radar as
source for speed and course
4. For automatic input, follow the procedure below. For manual input, go to step
5.
1) Check [Sensors].
2) Set the priority for the speed sensors in case of Local sensor. Click the triangle
on any line then select the sensor to set as the primary source of speed. All
other sensors are then set as secondary source. Only one sensor can be pri-
1-26
System
Local
[Setting]
Stablilization
mode
Sensor type
selection
Check for automatic
speed input
Speed
sensor
list
Check for manual
speed input
SPD page
Set speed and course of drift