Furuno FCR-21x9-BB Operator's Manual page 179

Button name
Record Displays Event log (user event, POSN event), NAV log (Voyage, Details, Chart
Usage), Target log (Danger Target).
Selects a color palette, day, dusk or night.
(Palette)
Adjusts the brilliance of a FURUNO monitor unit.
(Brilliance)
MOB Inscribes the MOB (ManOverBoard) mark.
Takes a screenshot.
(Capture)
Restores previous condition in route and user chart creation.
(Undo)
How to operate the buttons on the InstantAccess bar
The InstantAccess bar has four types of buttons: toggle button, drop-down list button,
slider bar button, and speciality button. (The MOB, Capture and Undo buttons are spe-
cialty buttons that provide a single-action function.) The buttons can be operated with
the trackball module or the InstantAccess knob. This section shows you how to op-
erate the buttons with the InstantAccess knob.
Toggle button
OFF ON
(gray) (light-blue)
1. Push the InstantAccess knob to enable its use with the InstantAccess bar.
2. Rotate the InstantAccess knob to select a button. The background color of the
button selected is light blue.
3. Do one of the following depending on button type.
1) Toggle button: Push the knob to select setting.
2) Drop-down list button or slider bar: Rotate the knob to select an item or ad-
just the slider bar. Push the knob to confirm your selection or setting.
Note 1: You can use the ESC key to go back one step in the current operating
sequence.
Note 2: The InstantAccess knob can only adjust the slider bar on the
InstantAccess bar.
Description
Drop-down list button
[Palette] button
Palette
choices
6. CHART OVERVIEW
Slider bar button
6-7