Split Screen - Furuno FCR-21x9-BB Operator's Manual

6. CHART OVERVIEW
6.11

Split Screen

You can split the screen in two, horizontally
or vertically, in the Voyage navigation
mode.
To activate the split screen or return to the
full screen, click the [DISP] and [TWO DISP]
buttons on the InstantAccess bar to show
the choices for screen division. Click the
screen division desired.
The example below shows the vertical split
screen.The orientation mode and the range
for the sub view are fixed to those in use before splitting the screen. The active display
can be switched by clicking an [ACTIVE] button at the top of the display. The dividing
line between the main and sub views cannot be moved.
Main View
Note 1: The display may not be updated when switching to the Voyage planning
mode. If this occurs, switch to the Voyage navigation mode, restore the split screen
display then return to the Voyage planning mode.
Note 2: The own ship mark may not appear at the screen center when releasing the
split screen display. If this occurs, click the indication T[M/CU Reset] at the top right
position on the screen to show the own ship mark at the screen center.
6-20
Click ACTIVE button to
switch active display.
Dividing line
Full screen
Vertical split
screen
Horizontal split
screen
Sub View