Furuno FCR-21x9-BB Operator's Manual page 24

SYSTEM CONFIGURATION
FCR-2839SW
Performance Monitor
PM-51
110-115/
220-230 VAC
1ø, 50/60 Hz
440 VAC
1ø, 50/60 Hz
Trackball Control Unit
ECDIS Control Unit
Trackball Control Unit
Category of Units
Antenna Unit: Exposed to the weather
All other units: Protected from the weather
EPFS must meet MSC.112(73); SMDE must meet MSC.96(72). GPS speed data does not meet IMO
requirements unless type approved for compliance with IMO resolution MSC.96(72). The update rate of
the gyrocompass must be better than 40 Hz (HSC) or 20 Hz (other than HSC).
*1
The MU-231 monitor meets the Category requirements for CAT 1C and CAT 1HC. If a different monitor
is to be used on IMO vessels, its effective diameter must meet the applicable Category requirements:
CAT 1C and CAT 1HC: effective diameter 320 mm or higher
CAT 2C and CAT 2HC: effective diameter 250 mm or higher
For installation, operation and viewing distance of other monitor, see its manuals
*2
Control Serial MC-3010S, Analog IN MC-3010A, Digital IN MC-3020D, Digital OUT MC-3030D
xxii
ANTENNA UNIT
Chassis
RSB-104/105
Sub Display 1
Sub Display 2
Transformer
RU-1803
Sensor Adapter *2
Radar Control
Unit RCU-025
OR
RCU-026
RCU-024
OR
Radar Control
Unit RCU-025
OR
RCU-026
Monitor Unit
*1
MU-231
Digital In (ACK IN)
100-115/220-230 VAC
Radiator
SN36AF (12 ft)
200/380 VAC, 3ø, 50 Hz
220/440 VAC, 3ø, 60 Hz
Transformer
RU-5693
Transceiver Unit
RTR-082
Transformer
RU-6522
Transformer
RU-5466
Gyro Converter
GC-10
RPU-013
RADAR
PROCESSOR
UNIT
LAN
EC-3000
PROCESSOR
UNIT
Dashed lines indicate
optional or local supply
1ø, 50/60 Hz
equipment.
110 VAC,
3ø, 60 Hz
220 VAC,
3ø, 50 Hz
440 VAC,
3ø, 50 Hz
A-D Converter
Gyrocompass
Heading Sensor
Serial 1, 2
IEC-61162-2
(Gyro, AIS)
Serial 3 - 8
IEC-61162-1
(GPS, Log,
Echo sounder,
Wind, Alarm,
Navtex, etc.)
Digital Out 1 - 6
1: System Fail
2: Power Fail
3: Normal Close 1
4: Normal Close 2
5: Normal Open 1
6: Normal Open 2
VDR
Intelligent Hub
HUB-3000