How To Show Or Hide Chart Objects - Furuno FCR-21x9-BB Operator's Manual

2.37.2

How to show or hide chart objects

The [Chart Disp] button on the InstantAccess bar has several buttons which control
chart object visibility.
No.
1 Coast Line Only
2 Chart Top Layer
3 Chart DISP Menu Show the [CHART DISPLAY] menu, where you set safety con-
4 Sel DISP Object
5 Chart Legend
Item
Hold down the left button to temporarily display only the coast-
line. Chart symbols (depth contours, navigation buoys, etc.)
are temporarily erased from the screen.
Hold down the left button to temporarily put the chart objects
(buoy, lighthouse, etc.) on the top layer.
tours, safety depth, etc. See the figure on the next page for the
content of this menu and see section 8.2 How to Control Visi-
ble Chart Objects for details.
Note: This menu can also be shown by right-clicking the
[CHART ON/OFF] button and selecting [Chart Display MENU].
Show the [SEL DISP OBJECT] menu, where you can select
the chart objects and text to show or hide. See the next page
for the menus and see section 8.3 How to Control Visible Nav-
igation Features (symbol display) for details.
Show the chart legend for
the current chart. See the
chapters on Vector and C-
MAP charts for a
description of the chart
legends.
2. RADAR, CHART RADAR OPERATION
Function
2-53