How To Use The Waypoints Page - Furuno FCR-21x9-BB Operator's Manual

12. ROUTES
How to use the Undo feature
The Undo feature, available when creating a route and a user chart, can be accessed
from the [Undo] button on the InstantAccess bar, use double-click, or the context-sen-
sitive menu. In route creation the feature is used with waypoint and text input as fol-
lows:
Waypoint input: Delete last-entered waypoint.
Text input: Erase last-entered character or character string.
12.3.1

How to use the Waypoints page

The following fields and boxes can be found in the [Waypoints] page. Scroll the list
rightward to see hidden items.
WPT: Each waypoint has a number.
Name: You can name each waypoint.
Latitude: WPTs latitude coordinate is dis-
played in selected datum.
Longitude: WPTs longitude coordinate is
displayed in selected datum.
Leg/°: Bearing of leg
Leg/NM: Length of leg (nm).
Str Mode: Define steering mode for each-
leg - rhumb line or great circle. Click to se-
lect [Rhumbline] or [Greatcircle].
Note 1: You can select the route information data to display
on the [Waypoints] page with the context-sensitive menu.
Right-click [WPT] or [Str Mode] then select [Edit columns] to
show the context-sensitive menu. Check or uncheck items
as appropriate then click the [OK] button.
Note 2: Processing waypoints with the context-sensitive
menu. See section 12.4.3 - 12.4.5.
12-4
RAD/NM: Define turning radius for each
waypoint. To change a radius, put the cur-
sor in this column to show up and down
arrows. Click the arrows to set the radius.
Ch Limit/m: Define channel limit for each
leg.
Plan SPD: Define minimum speed to use
with a leg.
SPD Max: Define maximum speed to use
with a leg.
Margin/m: Define extension for channel
to be checked against selected alerts.