Specifications; Before Assembly - Bowflex SelectTech 4.1 Assembly Manual

Hide thumbs Also See for SelectTech 4.1:
Table of Contents

Advertisement

Specifications

19.7"
50 cm
60.5"
21.1"
153.8 cm
53.6 cm
Maximum load limit
480 lbs. (218 kg)
Regulatory Approvals
This product is compliant with the applicable CE requirements.

Before Assembly

Select the area where you are going to set up and operate your equipment. For safe operation, the location
must be on a hard, level surface. Allow a workout area of minimum 120" x 120" (3 m x 3 m).
Basic Assembly Tips
Follow these basic points when you assemble your equipment:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the
left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, carefully lift and look through the bolt holes to help insert the bolt through the
holes.
5

Advertisement

Table of Contents
loading

Table of Contents