Bowflex SelectTech 4.1 Assembly Manual page 12

Step 5: Apply Labels to Frame Assembly
Apply Safety Warning Labels in the applicable language if the equipment will be
used by persons who do not read English.
Note: Record serial number in the Serial Number field at the beginning of this manual.
Step 6: Final Inspection
Inspect your equipment to ensure that all fasteners are tight, the equipment is level, and
components are properly assembled. If necessary, adjust the feet until they are evenly balanced
in contact with the floor.
Do not use the equipment until the equipment has been fully assembled and
inspected for correct performance in accordance with the Owner's Manual.
Assembly
12