Removing And Replacing The Headphone Speaker Connector - Motorola V300 Service Manual
Digital wireless telephones gsm 900/1800 mhz, 850/1900 mhz gprs
Hide thumbs
Also See for V300:
- User manual (155 pages) ,
- Start here manual (120 pages) ,
- Manual (58 pages)
Table of Contents
Advertisement
Level 1 and 2 Service Manual
Removing and Replacing the Headphone Speaker Connector
6809468A80
1.
Remove the battery cover, battery, SIM, antenna, and rear housing as
described in the procedures.
2.
Using the disassembly tool, gently pry up on the headphone speaker connector
to remove it from the rear housing as shown in Figure 12. Be careful not to
damage the leads.
Figure 12. Removing the Headphone Speaker Connector
3.
To replace, align the headphone speaker connector to the rear housing
assembly.
4.
Insert the top end of the headphone speaker connector into the rear housing
assembly.
5.
Press the bottom end of the headphone speaker connector into the rear housing.
Be careful not to damage the headphone connector speaker leads.
6.
Ensure headphone connector speaker leads will contact the transceiver board
when reassembled.
7.
Replace the rear housing, antenna, SIM, battery, and battery cover as
described in the procedures.
September 30, 2003
Rear Housing Assembly
Headset Connector
Disassembly
031644o
31
Advertisement
Table of Contents
Troubleshooting
