Troubleshooting; Manual Test Mode; Manual Test Mode Commands - Motorola V300 Service Manual
Digital wireless telephones gsm 900/1800 mhz, 850/1900 mhz gprs
Hide thumbs
Also See for V300:
- User manual (155 pages) ,
- Start here manual (120 pages) ,
- Manual (58 pages)
Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Manual Test Mode
Manual Test Mode Commands
Table 3. Manual Test Commands
Key Sequence
<Menu>048263* Enter manual test mode
"End" Key
Exit manual test mode
54*
Suspend
0*0*0
Select tone 0
0*0*1
Select tone 1
0*0*2
Select tone 2
0*0*3
Select tone 3
0*0*4
Select tone 4
0*0*5
Select tone 5
0*0*6
Select tone 6
0*0*7
Select tone 7
0*0*8
Select tone 8
0*0*9
Select tone 9
0*1*X
Disable tone X
3*0*1
Enable vibrator
3*0*0
Disable vibrator
5*0*0
Set audio level 0
5*0*1
Set audio level 1
5*0*2
Set audio level 2
5*0*3
Set audio level 3
5*0*4
Set audio level 4
5*0*5
Set audio level 5
5*0*6
Set audio level 6
5*0*7
Set audio level 7
44
Motorola V300 telephones are equipped with a manual test mode capability. This
allows service personnel to verify functionality and perform fault isolation by
entering keypad commands.
To enter the manual test command mode, a GSM / DCS test SIM must be used.
Press , to turn the phone OFF.
1.
2.
Remove the battery as described in the procedures.
3.
Remove the customer's SIM card from the phone as described in the
procedures.
4.
Insert the test SIM into the SIM slot.
5.
Replace the battery as described in the procedures.
Press , to turn the phone ON.
6.
Test Function/Name
September 30, 2003
Remarks
Required for all Test Mode Operations
V300/V500
6809468A80
Advertisement
Table of Contents
Troubleshooting
