Table of Contents
Advertisement
Setup Menu
REMOTE MENU Screen
The following table identifies and describes the parameters that may be set using the REMOTE MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter
Possible settings
REMOTE SELECT
[OFF]
This parameter is used to select a method for controlling external devices connected
via the DV IN/OUT terminal).
DV (SLAVE)
OFF
DV (TRIGGER)
DV (SLAVE)
DV(TRIGGER) : This setting is made when this DVD recorder is connected to a DV
REMoTE
[oFF]
dVS
dVT
REC CONTROL
[OFF]
This parameter is used to indicate whether or not the REC CONTROL panel is to be
ON
displayed on the monitor screen.
ON
: The REC CONTROL panel is to be displayed only when a recordable disc
has been inserted and the DVD recorder is in Stop, Recording, or Recording
REC
[oFF]
oN
Pause mode.
OFF : The REC CONTROL panel not to be displayed.
FOOT SW1
OFF
Set this item when connecting an external switch (foot switch, etc.) to the FOOT
[LOW EDGE]
SW1 terminal.
HIGH EDGE
OFF
LOW LEVEL
LOW EDGE : Switch between recording and record pause actions using the low
FSW1
oFF
HIGH EDGE : Switch between recording and record pause actions using the high
[LE]
HE
LOW LEVEL : Use the low level and high level of external switch signals for recording
LL
FOOT SW2
OFF
Set this item when connecting an external switch (foot switch, etc.) to the FOOT
SW2 terminal.
[LOW EDGE]
OFF
HIGH EDGE
BOTH EDGE
LOW EDGE : Add chapter marks and indexes using the low edge of external switch
FSW2
oFF
HIGH EDGE : Add chapter marks and indexes using the high edge of external switch
[LE]
HE
BOTH EDGE : Add chapter marks and indexes using the low and high edges of
bE
For setting the communication speed of the RS-232C terminal.
232C
[9600]
BAUDRATE
19200
9600 : Communicate at a rate of 9600 bps
19200 : Communicate at a rate of 19200 bps
Bps
[96]
192
70
Description
: Control is not to be carried out via the DV IN/OUT terminal.
This is the standard setting for normal operation.
: This DVD recorder will become the slave device and will be
controlled by the master device.
camera featuring a DV record triggering function, and it allows
this DVD recorder to record video from the camera in response to
operation of its trigger button.
: Set to this when an external switch is not used.
edge of external switch signals.
edge of external switch signals.
and record pause respectively.
: Set to this when an external switch is not used.
signals.
signals.
external switch signals.
Parameter
Possible settings
Set this item according to the type of controller connected when performing remote
232C
[TYPE1]
PROTOCOL TYPE
TYPE2
control using the RS-232C terminal.
TYPE3
TYPE1 : Standard operation mode
TYPE4
TYPE2 : For customized use
TYPE5
TYPE3 ~ TYPE8 : Spare
TYPE6
TYPE7
TYPE8
232C
[T1]
T2
T3
T4
T5
T6
T7
T8
MENU
This button is used to return to the Setup Menu screen.
MENU
Description
71
Advertisement
Table of Contents
