Table of Contents
Advertisement
Setup Menu
DISC MENU Screen
The following table identifies and describes the parameters that may be set using the DISC MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter
Possible settings
FINALIZE
[CANCEL]
This parameter is selected to finalize a disc to be finalized. If a disc recorded using
EXECUTE
this DVD recorder is to be played on a DVD player, it must first be finalized. Once
finalizing has been carried out, no addition recordings can be made on the disc.
FINAL
[CAN]
CANCEL
EXECUTE : Finalizing is to be carried out.
EXE
CANCEL DISC
[CANCEL]
Select whether to cancel the finalization of a finalized DVD-RW / DVD+RW. To add a
FINALIZATION
EXECUTE
recording to a finalized DVD-RW / DVD+RW set to EXECUTE. A DVD-RW / DVD+RW
finalized on another machine cannot be canceled.
CAN FIN
[CAN]
CANCEL
EXE
EXECUTE : Cancel the finalization. The TOP MENU created during finalization is
AUTO FINALIZE
[OFF]
For selecting whether to finalize automatically when ejecting the recorded disc using
ON
the OPEN/CLOSE button.
OFF : Do not finalize
AFINAL
[oFF]
ON : Finalize
oN
* Finalization processes may take up to 20 minutes to complete.
* The disc will be ejected without being finalized if the EXIT item on the Title
Menu Edit screen is selected.
* This function is only for DVD±RW.
AUTO CANCEL
[OFF]
For selecting whether to cancel finalization automatically when a finalized DVD-RW/
DISC FINALIZ.
ON
DVD+RW disc is inserted. Set this to ON when recording additional data to a finalized
DVD-RW/DVD+RW disc.
ACAN FI
[oFF]
Cancellation is not possible for DVD-RW discs that are finalized using other devices.
oN
OFF : Do not cancel finalization
ON : Cancel finalization
The Top Menu that has been created during the finalization process will also
be erased.
DISC ERASE
[CANCEL]
Select whether to do a quick erase on a DVD-RW / DVD+RW. A quick erase only
(QUICK)
EXECUTE
deletes the DVD-RW / DVD+RW disc control area. The time required is shorter than
a full erase, and the disc data is deleted.
q ERASE
[CAN]
CANCEL
EXECUTE : Do a quick erase. The disc can be newly recorded from the beginning.
EXE
DISC ERASE
[CANCEL]
Select whether to carry out a full erase on a DVD-RW / DVD+RW. All areas of a
(FULL)
EXECUTE
DVD-RW disc are deleted. If a disc is to be used repeatedly delete using this item.
CANCEL
F ERASE
[CAN]
EXECUTE : Do a full erase. The disc can be newly recorded from the beginning.
EXE
This button is used to return to the Setup Menu screen.
MENU
MENU
62
Description
: Finalizing is not to be carried out.
* A maximum of 20 minutes will be required to complete finalizing.
: Do not cancel the finalization.
deleted.
: Do not do a quick erase.
: Do not do a full erase.
INPUT SELECT MENU Screen
The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter
Possible settings
INPUT SELECT
LINE
This parameter is used to select the audio and video input signals.
Y/C
LINE : The composite video signal from the VIDEO LINE IN terminal and the analog
DV
audio signals from the AUDIO IN terminals are to be used.
[DVI]
Y/C
: The YC separate signal from the Y/C IN terminal and the analog audio signals
from the AUDIO IN terminals are to be used.
DV
: The digital video and audio signals from the DV IN/OUT terminal are to be used.
INPUT
LINE
DVI
: For input of the digital video signals from DVI IN terminal. The resolution of the input
YC
signal will be determined automatically (SXGA or XGA). Input the analog audio
dV
signals from the AUDIO IN terminal for sound input.
[dVI]
* The front-panel indicator corresponding to the type of input signal selected on this
screen will light up or start to flash.
Setting of this parameter will not be possible when REMOTE SELECT from the
REMOTE MENU screen has been set to DV(SLAVE), or DV(TRIGGER). DV signals
will be used for input at these times
MENU
This button is used to return to the Setup Menu screen.
MENU
SYSTEM MENU Screen
The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
SYSTEM MENU (1/2) screen
Parameter
Possible settings
This parameter is used to indicate whether or not a setup signal is to be added to analog
SETUP
OFF
video (i.e., composite or YC separate) during the recording process. The actual setting depends
[ON]
on whether the input analog signal contains a setup signal. (NTSC ouly)
OFF : This setting should be made when the input analog signal does not contain
a setup signal.
SETUP
oFF
ON
: This setting should be made when the input analog signal contains a setup signal.
[oN]
This parameter is used to indicate whether or not the color bar output by the DVD
TEST SIGNAL
[OFF]
recorder's internal signal generator is to be displayed.
ON
OFF : The color bar is not displayed and video from the VIDEO LINE IN terminal is
output to the monitor.
TEST S
[oFF]
ON
: The color bar is displayed. Use this setting when the color bar is to be recorded.
oN
This parameter is used to indicate whether or not all setup menu parameters are to
FACTORY
[CANCEL]
be returned to their default settings.
SETTING
EXECUTE
CANCEL
EXECUTE : Default settings are to be restored. However, the current set values for
FACTRY
[CAN]
EXE
Note
The system must be restarted after this parameter is changed.
Description
Description
: Default settings are not to be restored.
the TV TYPE item on the SYSTEM MENU (2/2) screen will not be erased.
63
Advertisement
Table of Contents
