Table of Contents
Advertisement
Setup Menu
RECORDER MENU Screen
The following table identifies and describes the parameters that may be set using the RECORDER screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
RECORDER MENU (1/2) screen
Parameter
Possible settings
CHAPTER
[MANUAL]
This parameter is used to indicate whether or not chapters are to be created
automatically at set intervals while recording.
CREATION
AUTO
MANUAL : Chapters are not to be created automatically.
CHAPTR
[MANU]
AUTO
AUTo
SET INTERVAL
Every01min
This parameter becomes active whenever CHAPTER CREATION has been set to
AUTO.
[Every05min]
It is used to set the time interval for automatic chapter creation and is set in units of
minutes.
Every59min
INTERV
1
[5]
59
AUTO CHAPTER
OFF
Select whether to automatically insert a chapter mark during a recording pause.
(REC PAUSE)
[ON]
OFF : Do not insert a chapter mark.
ON : Insert a chapter mark.
ATCHAP
oFF
[oN]
ENCODE
UXP (NOT
For setting the recording quality. Recording quality and time vary with the set values
as follows:
QUALITY
DVD VIDEO)
XP
(When using a 4.7 GB disc)
[SP]
Set Value
LP
EP
UXP
DLP
(NOT DVD VIDEO)
DEP
XP
SP
qUALTY
UXP
LP
XP
[SP]
EP
LP
DLP
EP
DEP
dLP
dEP
* Only UXP, XP or SP can be selected when the AUDIO ENCODE item is set to
LPCM.
TIMELAPSE REC
ON
For selecting whether to use the Timelapse Recording feature.
[NO USE]
Timelapse Recording: Allows recording over long hours through intermittent recording.
ON
: Use Timelapse Recording feature. A configuration screen will be displayed
TL REC
oN
[oFF]
NO USE : Do not use Timelapse Recording feature.
68
Description
Use this setting when chapters are to be set manually.
: Chapters are to be created at set intervals during recording.
The SET INTERVAL parameter below is used to specify this interval.
Recording Time Picture Quality
Upload Size
40 mins
High
D1 : NTSC = 720 x 480 dots
: PAL
= 720 x 576 dots
§
60 mins
120 mins
Normal
180 mins
∫
240 mins
360 mins
Low
HalfD1 : NTSC = 352 x 480 dots
∫
480 mins
: PAL
= 352 x 576 dots
☞
when this is set to ON. (
Page 41)
The AUDIO ENCODE item is automatically set to NO AUDIO.
Parameter
Possible settings
AUDIO ENCODE
NO AUDIO
This parameter is used to set the encoding format for audio data.
LPCM
NO AUDIO
[DOLBY DIGITAL]
MPEG
LPCM
A ENC
oFF
DOLBY DIGITAL : Dolby AC3 encoding (Compressed)
LPCM
MPEG
[dd]
Notes
MPEG
Only UXP, XP or SP on the ENCODE QUALITY item can be selected when the
AUDIO QUALITY item is set to LPCM.
This item will be automatically set to NO AUDIO when the TIMELAPS REC item is set to ON.
The MPEG set values can be displayed and selected when the TV TYPE item on the
SYSTEM MENU (2/2) screen is set to PAL.
DAILY REC
ON
For selecting whether to use the DAILY REC feature.
[NO USE]
DAILY REC : Allows recording to start/stop automatically at a designated time on a
dAILY
oN
ON
[oFF]
NO USE
∆
This button is used to display the RECORDER MENU (2/2) screen.
REC2
This button is used to return to the Setup MENU screen.
MENU
MENU
RECORDER MENU (2/2) screen
Parameter
Possible settings
[1,2ch † 1,2ch]
AUDIO
This parameter is to be set when recording an audio signal from the DV IN/OUT
3,4ch † 1,2ch
CHANNEL (DV)
terminal.
Specifically, it indicates whether the signals from channels 1 and 2 or from channels
dV CH
[1 2]
3 and 4 are to be recorded. (Only available for 32 kHz)
1,2ch † 1,2ch : Channels 1 and 2 are to be recorded.
3 4
3,4ch † 3,4ch : Channels 3 and 4 are to be recorded.
AUDIO REC
[BOTH]
This parameter is used to select the method for adjustment of audio recording levels.
VOLUME MODE
INDEPENDENCE
Specifically, both channels can be adjusted while maintaining the same level, or
each channel can be adjusted independently.
VRModE
[boTH]
BOTH
INdE
INDEPENDENCE : Both channels are to be adjusted independently.
ASPECT
[AUTO]
The screen aspect distinction signal of recorded video is selected.
AUTO
4:3
LETTER
SQUEEZE
4:3
LETTER
ASPECT
[AUTo]
SQUEEZE
4 3
Note
LETT
Setting this item to LETTER or SQUEEZE will not change the output image during
SqUE
recording and is reflected only in the recording to the disc.
This button is used to return to the RECORDER MENU (1/2) screen.
BACK
bACK
Description
: Do not record audio sound. The recording time will be longer as
sound recording is not performed.
: Linear PCM encoding (Non-compressed)
: MPEG encoding (Compressed)
daily basis.
: Use DAILY REC feature. A configuration screen will be displayed when
this is set to ON. (☞ Page 42)
: Do not use DAILY REC feature.
Description
: Both channels are to be adjusted while maintaining the same
level.
: Aspect distinction signal is recorded according to the screen aspect
ratio of the input video.
: Constantly records aspect distinction signal of 4:3 aspect ratio.
: Constantly records aspect distinction signal of letterbox video.
(Content at the top and bottom of the screen is blackened out.)
: Constantly records aspect distinction signal of squeezed video.
(Content at the left and right of the screen is compressed.)
69
Advertisement
Table of Contents
