Table of Contents
Advertisement
Preparation
Inserting & Removing Discs
Disc tray
OPERATE
AUDIO
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES
REV
STOP
Inserting a Disc
Press the OPERATE button to activate Operate On mode.
1.
Press the OPEN/CLOSE button.
The disc tray will open automatically.
While the disc tray is open, the OPEN/CLOSE indicator
will be lit up.
2.
Place the disc on the disc tray.
Ensure that the disc is inserted correctly into the tray's recess
with the printed side facing upward.
Carefully place the disc in the tray so as not to hit the front
panel.
3.
Press the OPEN/CLOSE button.
The disc tray will close automatically.
Notes
When a disc is inserted, information about that disc is
displayed on-screen. (☞ Page 17)
When either a new DVD-RW / DVD+RW or one that has
been erased on another machine is inserted, quick erase
starts up. (☞ Page 28)
When the AUTO CANCEL DISC FINALIZE item on the
DISC menu screen is set to ON, finalization will be
automatically canceled when a DVD-RW/DVD+RW that is
finalized using this unit has been inserted. (☞ Page 62)
22
BUSY
OPEN/CLOSE
OPEN/CLOSE indicator
OPEN/CLOSE button
OPTION DV Y/C LINE
SET UP
TITLE
CHAPTER
SET
TOP
PLAY
FWD
PAUSE
REC
MENU
MENU
Removing a Disc
Stop the DVD recorder.
1.
Press the OPEN/CLOSE button.
The disc tray will open automatically.
While the disc tray is open, the OPEN/CLOSE indicator
will be lit up.
If the current disc has not been finalized, the message
"NOT FINALIZE" will appear on both the monitor and LCD
display.
2.
Remove the disc from the disc tray.
Be sure to wait until the disc tray has opened fully before
removing the disc.
3.
Press the OPEN/CLOSE button.
The disc tray will close automatically.
Notes
If the DVD recorder is in either Recording mode or
Recording Pause mode, the disc tray will not open when
the OPEN/CLOSE button is pressed.
Pressing this button also has no effect during finalizing
and erasing.
When the AUTO FINZALIZE item on the DISC menu
screen is set to ON, finalization will be executed when
ejecting an unfinalized disc. (When the EDIT MENU item
on the DVD MENU screen is set to DISABLE.)
Precautions regarding the disc tray
Do not push the disc tray as it is opening or closing.
Do not place objects other than discs on the disc tray.
Do not press down on the disc tray.
Using a Keyboard
Menu settings, the title and chapter settings, and other DVD recorder settings are carried out from setting screens displayed on the
TV or monitor. In addition, recording operations can also be carried out from similar screens.
Although the DVD recorder's buttons are used in setting and operation screens, a keyboard can be used as an alternative.
Connections
Connect a USB keyboard to the USB terminal on the back of the DVD recorder.
This DVD recorder has the two USB terminals.
Attach the provided ferrite core
Attach the ferrite core as shown in the diagram to reduce
umwanted electromagnetic emission.
Attach the ferritec core as shown in the diagram to this
DVD recorder as near as possible.
The provided ferrite core
The wire clamp
Wind the cable once around
the ferrite core.
Procedure
The following functions can be controlled using the keyboard.
Function
Front panel
Keyboard
Selection of menu t button
† key
8 button
© key
items or setting
6 button
∞ key
values
7 button
√ key
Confirmation of
SET button
Enter key
settings
The entry of names and comments for the title and chapter menus is carried out using the keyboard. (Set KEYBOARD STYLE from
the SYSTEM MENU (1/2) screen in accordance with the keyboard's input language.)
MAIN
POWER
VIDEO
AUDIO
LINE
INPUT
CH1
LEVEL
IN
OUT
+4dB
-8dB
Y/C
Y/C
IN
OUT
CH2
REMOTE
FOOT SW
DV IN/OUT
1
2
FOR SERVICE
USB
AC IN
USB terminal
Note
Unless otherwise specified, this user's manual
describes procedures carried out from the DVD
recorder itself.
23
Advertisement
Table of Contents
