Table of Contents
Advertisement
LCD Display and On-Screen Content
On-Screen Content
In addition to loop through and playback screens, the monitor connected to the DVD recorder's VIDEO LINE OUT or Y/C OUT
terminal can display the following.
Status messages
Event messages
Recording-operation control screens : REC CONTROL panel (☞ Page 40)
The Setup Menu and a part of the Status messages are displayed on the monitor of the DVI OUT terminal.
Status Messages
The DVD recorder's setting condition and operation status are indicated by status messages, and these messages are displayed
on loop through or playback screens.
Status Messages of the DVI OUT terminal
REC
Status Messages of the VIDEO LINE or Y/C OUT terminal
The DISPLAY MENU screen can be used to indicate whether or not status messages are to be displayed.
To display status messages:
Set DISPLAY from the DISPLAY MENU screen to ON.
The various items of status information for display can be selected.
If DISPLAY is set to OFF, no status information will be displayed.
000 min
6
DVD-RW
5
FINALIZE
DISC TITLE
REC
3
TITLE 01 00:11:22
04/05/06
11:20:00
CHAPTER 01 00:11:22
No.
Item
1
Operation Mode
This area indicates the DVD recorder's current mode of operation.
Use RECORDER MODE from the DISPLAY MENU screen to indicate whether or not
this is to be displayed.
NO DISC
EJECT
STOP
REC
PAUSE
PLAY
STL
FWD >>
FWD >>>
REV <<
REV <<<
SLOW >>>
SLOW >>
SLOW <<<
SLOW <<
LOADING
RESTORE
16
Alarm messages
The Setup Menu (☞ Page 59)
REC
: While Recording
PAUSE
: While Recording Pause
FULL
: While Disc is Full
WAIT
: While Finalizing
While Recording stop
While Closing title
While Canceling finalization
While Loading
4
Data relevant to recording:
If the SET UP button is pressed while in Recording mode, the video
encode quality and the audio encoding format will be displayed. If
the SET UP button is then pressed once again, this information is
removed from the screen.
1
2
Description
: The DVD recorder currently contains no disc.
: The current disc is being ejected.
: Stop mode
: Recording mode
: Recording Pause mode
: Playback mode
: Still mode
: Fast-forward playback (low speed)
: Fast-forward playback (high speed)
: Fast-reverse playback (low speed)
: Fast-reverse playback (high speed)
: Slow-forward playback (high speed)
: Slow-forward playback (low speed)
: Slow-reverse playback (high speed)
: Slow-reverse playback (low speed)
: A disc is being loaded.
: Disc recovery in progress. (☞ Page 17)
No.
Item
2
Title number / Chapter
Use TITLE/CHAPTER / INDEX from the DISPLAY MENU screen to indicate whether or
number / Index number /
not this is to be displayed.
Counter
OFF
TITLE+CHAPTER: Title No., chapter No. and elapsed time of chapter (hr: min: sec) are
INDEX+TITLE
3
Date / Time
Use TIME/DATE from the DISPLAY MENU screen to select the way in which the date
and time are displayed.
OFF
DATE
TIME
TIME+DATE : Both date and time are displayed.
The date display style can be changed using DATE STYLE from the DISPLAY MENU
screen.
Recording mode : The date and time from the internal clock are displayed.
Playback mode : The date and time of disc recording are displayed. Minute/Second
4
Remaining time
Use REMAIN from the DISPLAY MENU screen to indicate whether or not this is to be
displayed.
Recording mode : The amount of video that can still be recorded on the current disc is
Playback mode : Not displayed
* Remaining time is to be used as a general guide, not as an exact figure.
Provided that a recordable disc has been inserted, this panel will be displayed whenever
5
REC CONTROL panel
REC CONTROL from the REMOTE menu screen is set to ON.
The REC CONTROL panel can be used to control recording operations. (☞ Page 43)
This is displayed even when the DISPLAY item is set to OFF.
When a disc is inserted into the DVD recorder, one of the following disc status is displayed
6
DISC STATUS /
on the monitor screen (Approximately 3 seconds)
Index display
DVD-R
: The current disc is a non-finalized DVD-R.
DVD-RW
: The current disc is a non-finalized DVD-RW.
DVD+R
: The current disc is a non-finalized DVD+R.
DVD+RW
: The current disc is a non-finalized DVD+RW.
DVD
: The current disc is a finalized DVD-R/RW or DVD+R/RW.
INVALID DISC : The current disc is neither DVD-R/RW or DVD+R/RW.
The following will be displayed when index is erased. (3 seconds)
INDEX ERASE: Displayed when erasing index.
This is not displayed if DISPLAY from the DISPLAY MENU screen is to OFF.
Disc Repair Feature
When the power supply is cut off during recording or other operations on this unit, there is a feature to repair the disc.
After the power supply is cut off during recording or other operations, the disc repair (RESTORE) will automatically start when the
power is supplied again.
Cautions
Do not switch off or plug out the power cord during disc repair.
The repair might not be possible depending on the disc.
Description
: No information is displayed
displayed.
: Title No. and total elapsed time (hr: min: sec) are displayed.
: No information is displayed.
: Only the date is displayed.
: Only the time is displayed.
displays will not be in continuous sequence during playback of
timelaps recorded discs.
displayed (in minutes). Only hours will be displayed when the
remaining time is 900 minutes or more.
(Displayed while being inserted.)
17
Advertisement
Table of Contents
