Table of Contents
Advertisement
Setup Menu
SYSTEM MENU Screen (continued)
Parameter
Possible settings
This parameter is set when using a USB keyboard, and its purpose is to indicate the
KEYBOARD
[ENGLISH]
keyboard's layout (or language) as one of the following.
STYLE
FRENCH
ENGLISH
ITALIAN
FRENCH
GERMAN
ITALIAN
SPANISH
GERMAN
JAPANESE
SPANISH
JAPANESE
KboARd
[ENG]
FRN
Note
The system must be restarted after this parameter is changed.
ITL
GER
ESP
JPN
For selecting whether to set DVD playback actions to the VTR or DVD mode. Actions
PLAY BACK
DVD
via RS-232C control will vary accordingly with this setting. Please see the following
&232C TYPE
[VTR]
table for details.
232C
dVd
[VTR]
Action
Playback
Index Search
STOP Operation in Stop Mode
(Unfinalized Discs)
This button displays the total time for recording and erasing operations. (xHour xxMin)
TOTAL RECORDING TIME
—
—
—
∆
This button is used to display the SYSTEM MENU (2/2) screen.
SYS2
This button is used to return to the Setup Menu screen.
MENU
MENU
64
Description
When Set to VTR
When Set to DVD
Accepts index of points that exist
Accepts index of points that exist
in the disc.
in the current title.
Resume data will not be cleared.
Resume data will be cleared.
Searches and stops at the
beginning of the last title.
SYSTEM MENU (2/2) screen
Parameter
Possible settings
AC IN MODE
[POWER ON]
For selecting whether to start up in the Operate ON or OFF mode when the MAIN
POWER OFF
POWER switch at the rear of this unit is turned ON.
POWER ON : Start up in Operate ON mode
AC
[oN]
POWER OFF : Start up in Operate OFF mode
oFF
TV TYPE
[NTSC]
For selecting the signal system during recording and playback.
PAL
NTSC : When recording/playing back in the NTSC mode
PAL
: When recording/playing back in the PAL mode
TV
[NTSC]
This unit will automatically be rebooted when this setting is changed.
PAL
Upon reboot, all menu items except the date/time data and hour meter will be
restored to their default values.
VBID OUT
[OFF]
For selecting whether to add the JCPX-1204 standard-compliant VBID (Video Blanking
(WIDE)
ON
ID) signals to the analog video signals output from this unit. (NTSC only)
OFF : Do not add VBID signals (The Copyguard signals are piled up even if the
Vbid
[oFF]
VBID is set to OFF.)
oN
ON : Add VBID signals
Y/C TERMINAL
[S1]
This parameter is used to set the specification for the DVD recorder's VIDEO Y/C
INPUT and OUTPUT terminal in order to enable the recording of wide-screen
MODE
S2
discrimination signals.
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video
Y C TM
[S1]
with a 4:3 aspect ratio and squeezed video is to be recorded.
S2
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
Squeezed video : 16:9 wide-screen content with the left and right sides
Letterbox video : Content with the top and bottom of the screen blackened out.
OPERATION
[OFF]
For selecting whether to enable operation lock.
LOCK
ON
OFF : Operation lock turns OFF and all operation buttons on the main unit are enabled
ON
: Operation lock turns ON and operation buttons on the main unit are disabled
oPLoCK
[oFF]
However, the CLOSE/OPEN, SET UP, SET and cursor buttons will not be
oN
disabled.
BACK
Returns to the SYSTEM MENU (1/2) Screen
bACK
Description
compressed for normal aspect screens.
65
Advertisement
Table of Contents
