Vhf Antenna - Furuno FM-8900S Installation Manual

1.1.3 Console installation (flush mount, option)
Requires the optional flush mount kit (OP05-129), the contents of which are shown in the table
below. Follow the instructions in the outline drawing to install the unit in a console.
Name
Mounting Plate
Self-tapping Screw
Hex Screw
1.2

VHF Antenna

1.2.1 Requirements for the antenna
Any good quality antenna that meets the requirements shown below can be used.
• Frequency range: 155 to 164 MHz
• Impedance: 50 ohms
• Polarization: Vertical
• Handling power: 30 W
• Quality: Withstand the marine environment
1.2.2 Installation location
The location and installation of different antennas on a ship is important to ensure effective com-
munications. Incorrectly installed antennas will degrade performance of the radio equipment and
reduce the range of communications.
Select the location for the antenna considering the following points.
• VHF antennas should be placed in a position which is as elevated and free as possible, with at
least 2 meters horizontal separation from constructions made by conductive materials.
• Ideally there should not be more than one antenna on the same level.
• The location of mandatory VHF antennas should be given priority compared with mobile tele-
phone antennas. If they are located on the same level, the distance between them should be at
least 5 meters.
Type
05-104-2603 100-323-160
5×20 000-802-081
M8×16 000-882-075
1. HOW TO INSTALL THE EQUIPMENT
Code no. Qty
1
4
2
2