2. CONNECTIONS
Protective earth
Connect a IV-2sq wire between the ship's ground and the ground terminal on the PR-240 to pre-
vent electrical shock.
2.9
When the Handset HS-2003 is not Connected to
the Transceiver Unit
When the Handset HS-2003 is not connected to the transceiver unit; namely, the remote handset
is used always, turn on [M-HS HOOK] in the [OTHER] menu. See section 4.6.
2.10
Rainproof Cover for Transceiver Unit
The optional rainproof cover kit (Type: 05-104-2601, Code No. 001-174-310-10) , consisting of a
protective hood and double-sided tape, protects the connectors at the rear of the transceiver unit
from rain and water splash. The cover can be used with both the desktop and flush mount instal-
lation methods.Connect the cables to the transceiver unit then install the cover as shown below.
Attach double-sided tape.
CAUTION
Attach protective earth securely to
the ship's ground.
The protective earth (grounding) is
required to prevent electrical shock.
14
GND terminal
Attach hood to
transceiver unit.