How To Assemble The Vhf Console Kit - Furuno FM-8900S Installation Manual

3. HOW TO ASSEMBLE THE
VHF CONSOLE KIT
A VHF console kit is required to install the transceiver unit in the VHF console. There are two types
of consoles, with a printer and without a printer.
1. Remove the cover assembly, the panel assembly and the printer assembly (or concealing lid)
from the console. For the printer assembly, remove the cable connected to the terminal board.
Panel assy.
2. Fasten the panel assembly to the transceiver unit with the binding screws (use binding screws
of the transceiver unit). Loosely insert M8×16 hex bolt (with plain washer) at both sides of the
transceiver unit.
Panel
assy.
Printer assy.
(or Concealing lid)
Binding screw
Hex bolt (with
plain washer)
18
Cover assy.