How To Connect The Remote Station Without The Junction Box12 - Furuno FM-8900S Installation Manual

2. CONNECTIONS
2.6.3 How to fasten the cables to the Junction Box
Connect cables to related connectors. Fasten the cables to the cable posts with two cable ties.
2.7 How to Connect the Remote Station without the
Junction Box
The remote station (MIC receptacle box, etc.) can be connected directly to the transceiver unit,
using the D-sub connector supplied as installation materials. Attach the connector to the cable as
follows.
D-sub connector assy. XM3A-3721,
Connector hood XM2S-3712
Shield tape (metal)
Fold back armor,
and then wind shield
tape along edge of cable.
12
Fasten cable to
post with two
cable ties.
Cable clamp
Cable